Titanium Block
W: 200-1400mm
H: 20-500mm
Density: 4.51g/cm3
Material: Titanium Grade1,Grade2,Grade5,Grade7,Grade9,Grade12
Standard: ASTM B381, AMS 4928, AMS4911, UNS R56400
Forged titanium square blocks (forgings): primarily comply with GB/T 16598-2013"Titanium and Titanium Alloy Forgings"or ASTM B381 (American Standard for Titanium and Titanium Alloy Forgings). These are mostly large-sized semi-finished products, intended for subsequent processing into key components.
Square/rectangular bar materials: For small-sized cold/hot-worked square bars, refer to GB/T 2965-2007"Titanium and Titanium Alloy Bar Materials"; for specific square tube structures, refer to GB/T 41750-2022"Titanium and Titanium Alloy Square and Rectangular Tubes".
Chemical composition and grade: All titanium blocks must comply with the grade composition specified in GB/T 3620.1-2007 (e.g., pure titanium TA1/TA2 corresponds to Gr1/Gr2, and alloy TC4 corresponds to Gr5).
Specifications：
Common grades: commercially pure titanium (TA1, TA2), titanium alloys (TC4, TC6, TC11, etc.).
Supply condition: titanium blocks Typically in the annealed state (M) to ensure good plasticity and processing performance.
Inspection requirements: titanium blocks must include chemical composition analysis, mechanical property testing (tensile strength, elongation, etc.), and large-sized forgings usually require ultrasonic flaw detection and non-destructive testing